3E0659NI-GB-GR
IP66 SURFACE MOUNT PUSH BUTTONS
- IP66 Ingress protection
- Momentary contact
- N/O, N/C, C
- RoHS compliant
- 12Vdc Independant bi-colour LED illumination
- Quality stainless steel switch body construction
- M16/20 Pre-moulded conduit knockouts
Description
The 3E0659NI-GB-GR is just one of the variants in the range of high impact, externally rated surface mount buttons. The robust two part cross polymer housing incorporates an integral gasket that seals the unit to IP66. This product is a reliable solution for external egress and other outdoor switching applications.
The base incorporates premoulded conduit knockouts (both M16 and M20). These aid installation by ensuring effective cable management.
Legend discs are manufactured from an externally rated bi-colour engraving laminate which is available in a variety of colour combinations. The discs are gasketed using an open cellular foam, when the switch is tightened to the unit, the cell closes to maintained IP rating.
The bi-colour illumination (green and red) can be wired in numerous ways to give pleasant visual feedback to the user. The Dual halo illumination switches are particularly effective in low light environments.
Specification
Electrical
| Life | 0.2 million actuations at Rated Switching Capacity |
| Insulation Resistance | >100MΩ |
| Contact Resistance (initial) | <30mΩ |
| Rated Switching Capacity | 750W |
| Switching Current | max. 5 / 3 A |
| Switching Voltage | max. 125 / 250 VAC |
Mechanical
| Travel | 0.8mm |
| Operating Force | 4.5N |
| Life (nominal) | 1.5 million actuations |
| Contact Bounce | <5ms |
Environmental
| Operating Temperature Range | -25°C to +85°C |
| Ingress Protection | IP 67 |
| Impact Rating | IK 07 |
| Contact Material | Ag |
| Housing | Stainless steel |
| Actuator Material | Stainless steel |
Material
| Plate material | Grade 304 DP1 stainless steel (2mm) |